Denon DN-700R El manual del propietario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 119
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Part names and
Functions
Connections Playback
Selecting
Files and
Folders
Getting Started
Control
Function
Information
26
Selecting
Media
Recording Edit FunctionSetting defaults
n Firmware Version
Displays the firmware version of the DN-700R.
Select “Utility” and rotate the jog dial to select “Firmware Version”, then press ENTER.
Displays the firmware version of the DN-700R.
n Format Media
Formats the currently used media (SD1/SD2/USB).
1
Select “Utility” and rotate the jog dial to select “Format Media”, then press ENTER.
The media list is displayed.
Media List
USB: CURRENT
SD1(None)
SD2(None)
2
Rotate the jog dial to select the media, and press ENTER.
3
Select “OK” with the jog dial, and press ENTER.
“Formatting” is displayed during formatting, and “Completed” is displayed when the formatting is
complete.
n Speed Check
Checks the read and write speed of the currently used media (SD1/SD2/USB).
Always perform a speed check on media before using it.
1
Select “Utility” and rotate the jog dial to select “Speed Check”, then press ENTER.
The media list is displayed.
Media List
USB: CURRENT
SD1(None)
SD2(None)
2
Rotate the jog dial to select the media, and press ENTER.
3
Select “OK” with the jog dial, and press ENTER.
Media check starts and “Check Speed ...” is displayed.
•The following results are displayed when the speed check is complete.
“Good”: The checked media is suitable for use.
“Good w/o Rec Mon”: The checked media is suitable for simple recording but is unsuitable for recording
monitoring.
“Poor”: The checked media is unsuitable for use.
4
Select “OK” and press ENTER.
n Network Status
Displays network setting information.
Select “Utility” and rotate the jog dial to select “Network Status”, then press ENTER.
Network setting information (IP address/MAC address) is displayed.
Setting defaults
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 118 119

Comentarios a estos manuales

Sin comentarios